Broken bridge aluminum door and window processing equipment, vibrating machine, door and window processing equipment, door and window equipment. www.jnzfjq.cn Nowadays, most people are just starting to install broken bridge aluminum doors and windows, and the sales market for broken bridge aluminum doors and windows is also getting better and better. Many customers have already come to me to purchase broken bridge aluminum door and window equipment. But those who have produced and produced broken bridge aluminum doors and windows know that the broken bridge aluminum door and window equipment is not just a single machine equipment, but a complete set. So how are broken bridge aluminum doors and windows produced using broken bridge aluminum door and window equipment?

The production process of vibrating aircraft bridge aluminum doors and windows is as follows:

1. Cutting materials

Cutting, also known as "cutting", is the first process in the production of broken bridge aluminum doors and windows. The key is to use active cutting machine to accurately laser cut the length of raw materials according to the detailed planning rules and referring to the construction drawings of the window and door engineering project. The cutting standard error should be operated within the 2mm range, 2. Drilling holes

The assembly of the frame and sash of broken bridge aluminum doors and windows usually uses screw connections. Therefore, whether it is the assembly of horizontal and vertical components or the fixation of spare parts, holes must be drilled in the opposite parts. Small bench drills can be used for drilling aluminum profiles, as there is an operating table, which can ensure the accuracy of the drilling position reasonably; Choosing a shotgun style flashlight drill is beneficial for quick and practical operation. Before drilling, it is necessary to accurately position the lines on the aluminum profile according to the assembly rules, with precise drilling locations and appropriate diameters. It is not possible to continuously change the drilling on the surface of aluminum profiles, as once a hole occurs, it cannot be restored.

2. Assembly

Assemble the aluminum profiles using screws according to the construction drawings of the project. There are three assembly methods for broken bridge aluminum doors and windows: 45 degree connection, oblique connection, and vertical connection. The connection of horizontal and vertical bars is generally achieved by using specialized connectors or aluminum angles, and then fixing them with screws, anchor bolts, or aluminum rivets.

① The scale of the door frame is incorrect, and the height difference of the prefabricated component devices near the door frame and leaf, as well as the same floor plan, should meet the relevant requirements.

② The connection of prefabricated door components should be reinforced, and corrosion-resistant filling materials should be used to make a part of the connection sealed and moisture-proof.

③ The installation location of door accessories should be appropriate, complete, and sturdy, with a separation effect, sufficient compressive strength, flexible opening and closing without noise, and suitable for continuous fitness exercise. The structural type should be easy to replace.

④ The quality of laminated glass, hardware, sealing and other accessories used for doors should be consistent with the quality level of the door.

⑤ After installation, it should be ensured that the laminated glass is embedded in the slot space, and vibration damping pads should be installed in critical positions to buffer the impact of opening and closing forces.

⑥ The surface of the door decoration plan does not need to have obvious hazards.

⑦ There should be no obvious color deviation on the surface of the prefabricated components near the door.

⑧ The surface of the door does not need to have iron filings, burrs, oil stains, or other stains, and there is no need for adhesive tape to flow out of the device connection.

3. Protection or packaging

After the semi-finished products are processed, assembled, and tested to be qualified, they are removed neatly, covered with product qualification certificates, packaged, and then wait for the next process, such as the revenue warehouse or inbound and outbound shipping logistics.

The production of broken bridge aluminum doors and windows is a very complicated process, and the rules for machine equipment for broken bridge aluminum doors and windows are also very high. When using machinery and equipment to produce broken bridge aluminum doors and windows, even slight variations in production quality can occur. Therefore, producing broken bridge aluminum doors and windows is not only an exercise for professional technical personnel, but also an exercise for broken bridge aluminum door and window machinery and equipment. Broken bridge aluminum door and window processing equipment, vibration aircraft, door and window processing equipment, door and window equipment, Jinan Vibration Aircraft Co., Ltd.