1、 In terms of power supply, as the commonly used voltage for bridge cut aluminum door and window processing equipment is 380V, it is important to pay attention to the connection of live and neutral wires when wiring. Generally speaking, door and window equipment manufacturers will give a color, whether the live wire is black or blue, and the neutral wire is red (depending on the situation of each factory). If the live wire is connected upside down, simply switch two wires at each end of the live wire.

2、 In terms of gas source, as the pressing material of door and window processing equipment is compressed by cylinders, ensuring sufficient gas source is a prerequisite for equipment use. If the air pressure is not reached, the saw blade of the double headed cutting saw for broken bridge aluminum profiles will be affected, and the processing effect will be correspondingly affected. Generally speaking, a set of door and window processing equipment should ensure that the air pressure can reach 8 pressures and the gas supply flow rate can reach 0.3. If there are too many devices, relying solely on an air pump is not enough, one or two gas cylinders need to be prepared.

3、 In terms of equipment, due to the wide variety of door and window processing equipment, each type of equipment may have multiple machines. It is particularly important to check the door and window equipment, such as the air pipe plug of the cutting saw, the speed of the saw blade entering and leaving, and the working status of the saw head on both sides. Attention should be paid to every aspect of the installation and commissioning of the broken bridge aluminum door and window equipment, and every detail should be grasped firmly, so that the commissioning can be carried out smoothly.